GO-AUTOWORKS 90-93 Integra Charge Piping Kit
GO-AUTOWORKS DA 1990-1993 Integra Charge Pipe kit is the newest edition to our line up. We've developed this kit after much demand. The kit is available in 2 forms.
Type A: Uses a hotside that passes the intercooler piping thru the hole behind the drivers side headlight. We recommend you use a turbo setup with the compressor housing facing up on the drivers side for this application
Type B: Passes the hotside charge piping thru the lower frame rail on the drivers side. This setup will simply require cutting a hole in the frame rail w/ a hole saw and will work with virtually any turbo configuration with the compressor housing facing down.
The 90-93 Integra charge pipe kit fitment was built around a non ABS chassis as shown in the photo.
*ALL OF OUR CHARGE PIPE SETS ARE BASED AROUND FITMENT OF OE/OE STYLE INTAKE MANIFOLDS AND GO-AUTOWORKS EXHAUST MANIFOLDS
*As of 8/15/18 we will no longer deviate the pipe lay out to accommodate other manifold styles via the website. If you have a custom order/fit request then you must email email@example.com
GO-AUTOWORKS.COM Ph: (334)277-8030 firstname.lastname@example.org